Hunter Fan Switches Smart Led Ceiling Lights

Set up the hanger pipe – Place the hanger pipe within the gap on the highest of the fan motor. Slowly draw out the wires from the middle. Tighten the set-screws supplied with the fan. Connect the blades – Connect the fan blades to the principle physique. Customary fan blades include a two-pronged attachment. Join the screws by way of the holes current on the blades to the flanges. Tighten them utilizing a screwdriver.

You may test by unscrewing and reducing the fan’s housing the ceiling; you can see a label that may designate it as being fan-rated. U-bolts or lag screws ought to join the field to a bracket or a strong wooden block for stability.


As a result of a fan makes use of nearly the identical quantity of energy as a ceiling fixture, the electrical circuit will not be overloaded. In case your fan consists of lights, be certain the circuit it is on has sufficient capability to deal with the extra load. If not, you need to run a brand new circuit with a brand new circuit breaker from the home’s principal service panel or sub-panel to the fan. If there isn’t a central mild fixture, you may need to create a spot to hold the ceiling fan. Then, you may must carry electrical energy to it. You may faucet into an current circuit to do that.

Earlier than you start putting in your ceiling fan, make sure that the facility to the fixture is off. Double test this with a high-voltage neon tester if doable. Lock the breaker field to ensure nobody unintentionally turns the facility again on when you are putting in the fan. Ensure you have any needed permits, if relevant. Just be sure you have sufficient room for a fan.