Ceiling Fan Light Blinking Outdoor Floor Standing Fans

Wire the fan – Decide the new and customary wires by coloration: black is sizzling for the fan, blue is sizzling for the sunshine equipment, white is frequent for the fan and lightweight equipment, and inexperienced is floor. In all instances, ensure that all uncovered wiring is secured inside wire nuts. Wires should be linked in such a means that the black home wires are linked to the black ceiling fan wires whereas the white home wires are linked to the white fan wires. The usual colours for grounding wires are both naked copper or inexperienced. You must wire-nut the bottom wires from the field to these from the facility provide and the fan. As soon as wiring is full, gently push wires into the electrical field.

Set up the hanger bracket – Set up the hanger bracket utilizing lock washers and screws. Lock washers ought to be supplied with the fan but when they don’t seem to be part of the set up equipment then buy them from a ironmongery store. Lock washers will stop the screws from loosening when the fan vibrates.


As earlier than, use a voltage tester after you take away the faceplate and swap to ensure that the wires are secure to the touch and disconnect the wires from the swap. Per the instructions on the anti-hum fan management, twist the wires current collectively and after including the wire nuts, exchange the management and faceplate earlier than restoring the facility.

Earlier than you start putting in your ceiling fan, make sure that the facility to the fixture is off. Double test this with a high-voltage neon tester if doable. Lock the breaker field to ensure nobody unintentionally turns the facility again on when you are putting in the fan. Ensure you have any needed permits, if relevant. Just be sure you have sufficient room for a fan.