Diy Ceiling Fan Installation Install No Wiring Exists

Set up the hanger pipe – Place the hanger pipe within the gap on the highest of the fan motor. Slowly draw out the wires from the middle. Tighten the set-screws supplied with the fan. Connect the blades – Connect the fan blades to the principle physique. Customary fan blades include a two-pronged attachment. Join the screws by way of the holes current on the blades to the flanges. Tighten them utilizing a screwdriver.

The motor, as the facility supply, may be the a part of the fan that’s the most tough to switch. Motors lately are are constructed to final, although, and it’s thought-about a reasonably uncommon downside if it’s the motor itself that fails. Alternative may be needed if the motor fails, though in case you are connected to the ceiling fan itself, you may all the time test with a specialist.


Verify to ensure that your fan has been put in right into a specifically designed ceiling electrical field that’s made for followers, as an everyday one that’s meant just for lights will likely be unable to assist the fan’s fixed motion and weight. If the fan put in into the mistaken form of electrical field, you have to a specialist or an electrician.

As a result of a fan makes use of nearly the identical quantity of energy as a ceiling fixture, the electrical circuit will not be overloaded. In case your fan consists of lights, be certain the circuit it is on has sufficient capability to deal with the extra load. If not, you need to run a brand new circuit with a brand new circuit breaker from the home’s principal service panel or sub-panel to the fan. If there isn’t a central mild fixture, you may need to create a spot to hold the ceiling fan. Then, you may must carry electrical energy to it. You may faucet into an current circuit to do that.