Ceiling Fan Drop Westinghouse Halley

Set up the hanger pipe – Place the hanger pipe within the gap on the highest of the fan motor. Slowly draw out the wires from the middle. Tighten the set-screws supplied with the fan. Connect the blades – Connect the fan blades to the principle physique. Customary fan blades include a two-pronged attachment. Join the screws by way of the holes current on the blades to the flanges. Tighten them utilizing a screwdriver.

The blades of your ceiling fan are essentially the most recognizable half, and fortunately, as a consequence of the truth that they’ll put on out and even break, are sometimes simply changed. Even when your fan is of international building or is just much less frequent, alternative blades can all the time be drilled to suit.


Followers ought to be mounted at least 7’ from the ground and 12” from the ceiling. 18” from the ceiling is preferable for extra air circulate. Followers have to be mounted not less than 24” from any obstructions. An acceptable junction or outlet field securely connected to the constructing construction is required. Substitute the outdated field with one labeled as accepted for ceiling followers or ceiling suspended ”paddle” fan set up. The field and its assist should be capable of assist the transferring weight of the fan. Use the set up hardware beneficial by the junction field producer. Followers of over 35 kilos, with or with out equipment, require extra assist unbiased of the outlet field. Verify with knowledgeable about your native constructing codes.

While you go to the ironmongery store to switch the pullchain and socket, be sure to match it up with the fan you’ve gotten. Learn the way many wires are utilized in your pullchain and what number of speeds your fan has, and ensure that the chain you purchase is similar.