Minka Aire Ceiling Fan Light Bulb Replacement Rod Fitting

Verify to ensure that your fan has been put in right into a specifically designed ceiling electrical field that’s made for followers, as an everyday one that’s meant just for lights will likely be unable to assist the fan’s fixed motion and weight. If the fan put in into the mistaken form of electrical field, you have to a specialist or an electrician.

Followers ought to be mounted at least 7’ from the ground and 12” from the ceiling. 18” from the ceiling is preferable for extra air circulate. Followers have to be mounted not less than 24” from any obstructions. An acceptable junction or outlet field securely connected to the constructing construction is required. Substitute the outdated field with one labeled as accepted for ceiling followers or ceiling suspended ”paddle” fan set up. The field and its assist should be capable of assist the transferring weight of the fan. Use the set up hardware beneficial by the junction field producer. Followers of over 35 kilos, with or with out equipment, require extra assist unbiased of the outlet field. Verify with knowledgeable about your native constructing codes.


Pullchain switches are the most typical a part of a ceiling fan to require restore, probably as a consequence of the truth that they’re the half that’s most frequently dealt with. You may discover that the chain will be pulled out of the socket if yanked too exhausting, however fortunately they’re simply taken care of.

Be sure that energy is current by checking the swap and the fuse field. You are able to do this pretty simply by turning off the facility to the fan circuit and unscrewing the screws that maintain the swap the electrical field. You may want a voltage tester (accessible from a ironmongery store or dwelling heart) to test the screw terminals to ensure that they don’t seem to be charged after which you may pull the swap from the field itself.