Panasonic Whisper Fan Installation Home Depot Hunter Outdoor Ceiling Fans

After you unscrew the wires from the terminals, straighten the ends of the wire with needle-nosed pliers earlier than you twist the 2 ends collectively and screw a wire nut over the twisted wires. Flip the circuit again on and see if the fan works. If it does, the swap is dangerous and you must exchange it. If there’s nonetheless no exercise, you have to a specialist to test the wiring and the fixture.

Earlier than unscrewing the entire fixture, nonetheless, tighten all screws by hand. In case you have a droprod concerned in supporting your fan, ensure that the ball joint on the prime of the drop rod is well-settled with the assist bracket. Equally, ensure that the blade ideas grasp an equal distance from the ceiling; if the blades are warped, a wobble might end result. If so, you may name the producer for blade replacements or head to your native dwelling heart.


Followers ought to be mounted at least 7’ from the ground and 12” from the ceiling. 18” from the ceiling is preferable for extra air circulate. Followers have to be mounted not less than 24” from any obstructions. An acceptable junction or outlet field securely connected to the constructing construction is required. Substitute the outdated field with one labeled as accepted for ceiling followers or ceiling suspended ”paddle” fan set up. The field and its assist should be capable of assist the transferring weight of the fan. Use the set up hardware beneficial by the junction field producer. Followers of over 35 kilos, with or with out equipment, require extra assist unbiased of the outlet field. Verify with knowledgeable about your native constructing codes.

Pullchain switches are the most typical a part of a ceiling fan to require restore, probably as a consequence of the truth that they’re the half that’s most frequently dealt with. You may discover that the chain will be pulled out of the socket if yanked too exhausting, however fortunately they’re simply taken care of.