Fan Lamp Cover Outdoor Pole Mounted Fans

Set up the hanger pipe – Place the hanger pipe within the gap on the highest of the fan motor. Slowly draw out the wires from the middle. Tighten the set-screws supplied with the fan. Connect the blades – Connect the fan blades to the principle physique. Customary fan blades include a two-pronged attachment. Join the screws by way of the holes current on the blades to the flanges. Tighten them utilizing a screwdriver.

As earlier than, use a voltage tester after you take away the faceplate and swap to ensure that the wires are secure to the touch and disconnect the wires from the swap. Per the instructions on the anti-hum fan management, twist the wires current collectively and after including the wire nuts, exchange the management and faceplate earlier than restoring the facility.


Pullchain switches are the most typical a part of a ceiling fan to require restore, probably as a consequence of the truth that they’re the half that’s most frequently dealt with. You may discover that the chain will be pulled out of the socket if yanked too exhausting, however fortunately they’re simply taken care of.

Earlier than unscrewing the entire fixture, nonetheless, tighten all screws by hand. In case you have a droprod concerned in supporting your fan, ensure that the ball joint on the prime of the drop rod is well-settled with the assist bracket. Equally, ensure that the blade ideas grasp an equal distance from the ceiling; if the blades are warped, a wobble might end result. If so, you may name the producer for blade replacements or head to your native dwelling heart.